technical data sheet f 75 ? short circuit plug 74S12S-000S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 3 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to iso 2768 m-h interface according to iec 169-24 , eia-550 documents application note an001 ?calibration services? material and plating connector parts material plating center conductor cube gold, min. 1.27 m, over nickel outer conductor stainless steel passivated coupling nut stainless steel passivated
technical data sheet f 75 ? short circuit plug 74S12S-000S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 3 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data frequency range dc to 4 ghz return loss ? 0.10 db, dc to 4 ghz error from nominal phase 1 ? 1.0, dc to 4 ghz 1 the nominal phase is defined by the offset delay, the offset loss and the short inductance. mechanical data mating cycles ? 500 maximum torque 6.78 nm recommended torque 2.00 nm gauge 0.00 mm to 0.10 mm general standard definitions for proper operation the vector network analyzer (vna) needs a model describing the electrical behaviour of this calibration standard. the different models, units, and terms used will depend on the vna type and they will have to be entered into the vna. all val ues are based on typical geometry and plating. offset z o / impedance / z o 75 ? offset delay 53.371 ps length (electrical) / offset length 16.00 mm offset loss 1.30 g ? /s loss 0.0080 db/ ghz short inductance 2 2 short inductances are determined indi vidually for each short circuit and are doc umented in a calibration certificate. environmental data operating temperature range 3 + 20 c to +26 c rated temperature range of use 4 0 c to +50 c storage temperature range - 40 c to +85 c rohs compliant 3 temperature range over which these specification are valid. 4 this range is underneath and above the operating temperature range, within the short ci rcuit is fully functional and could be used without damage.
technical data sheet f 75 ? short circuit plug 74S12S-000S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 3 / 3 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg declaration of calibration options factory calibration standard delivery for this calibration standard includes a factory calibration. the calibration certificate issued reports individual calibration results, traceable to rosenberger standards , national / international standards are not available. model ba sed standard definitions are indivi dually optimized and reported in an agilent/keysight, rohde & schwarz and anritsu compatible vna format. accredited calibration not available. for further, more detailed information see application note an001 on the rosenberger homepage. calibration interval recommendation 12 months packing standard 1 pce in box weight 40.5 g/pce draft date approved date rev. engineering change number name date herbert babinger 14.04.15 markus mller 25.08. 16 i00 16-1390 marion striegler 25.08.16 while the information has been carefully compiled to the best of our knowledge, nothing is int ended as representation or warran ty on our part and no statement herein shall be construed as recommendati on to infringe existing patents. in the effort to improve ou r products, we reserve the right to make changes judged to be necessary.
|
